Paste for processing joints of stretch ceiling profiles (P1)

General recommendations:
Use on a fixed profile after installing the panels.
Stir component B before use.
Do not allow the product to get on the canvas (important when using black paste).
To prevent paste from getting on the canvas, cover the canvas with masking tape.
If black paste gets on white PVC or fabric, there is a possibility
remove the stain using a soap solution and gently rubbing the white paste into the fabric.
Do not use as a stain and stain remover on translucent fabrics.
Do not use as touch-up on profiles (painting over scratches, chips, etc.
Scope of application:
For processing visible joints of painted profiles.
Possible use as a means to remove stains and dirt on white matte PVC and fabrics.
General information and instructions for use:

If the paste is stored immobile for a long time, significant thickening (hardening of the components) is possible, even in unopened tubes. This process is related to the characteristics of the components used and is not a product defect. In case of thickening of the paste
necessary:
1) Knead the tube well with your hands until the paste becomes elastic again and does not
will acquire the desired consistency (the thicker the paste, the wider the gap can be processed; it is not recommended to process gaps more than 2 mm wide!)

2) Remove the tube spout and gently mix the paste
stirrer; if necessary, use a tube without a spout.

3) If the consistency is not liquid enough, add 0.05 ml to the tube. (1 drop) of component B, to dilute and mix, repeat if necessary.

During longer storage, as well as freezing/thawing of the product,
solid particles of component B may precipitate, which does not affect its coloring ability and is eliminated by stirring.